Discovery Engineering

  • Home

Volume 4, 2016

About the Cover

Traffic Accidents is a major public health problem, causing approximately 1.2 million deaths and 50 million injuries worldwide each year. In developing countries, interest rates between the main reason for deaths and injuries; in particular, India experienced the highest rate accidents of this type. Therefore, in order to reduce the severity of the accident was of great interest to transportation Institutions and the public. In this paper, we apply data mining techniques to link the characteristics of recording the severity of road accidents in India, and to develop a mechanism through which transit can be used to improve India's security rules.


Previous | Next

ANALYSIS

Cognitive emotion recognition for elder care in homes

Rajashree T, Ramya R

The elderly cognitive function decreased significantly due to the change in social roles and physical ability, which seriously affects the quality of their life and mental state.

Discovery Engineering, 2016, 4(11), 70-78

Full Text | PDF

Minimization of Fuel Cost in Generating Power System by using an Efficient Gravitational Search Algorithm

Jeevitha R, Rizwana J, Aravind R

This paper presents the solution for Economic Dispatch Problem (EDP) in order to reduce fuel cost of the generators by using an efficient optimization technique called Gravitational Search Algorithm (GSA).

Discovery Engineering, 2016, 4(11), 94-99

Full Text | PDF

Comparative studies on switched capacitor based single phase multilevel inverter fed from PV systems for isolated applications

Yasmin Taj S, Yamuna M, Revathi V, Habeebullah Sait H

This paper presents comparative studies on different levels of single phase inverter for standalone photo voltaic systems with simple pulse width modulation scheme.

Discovery Engineering, 2016, 4(11), 109-117

Full Text | PDF

Cost analysis of energy efficient solar water pumping system

Karpagam N, Ganga devi TS

Increase in power demand leads to the distributed generation with renewable energy resources. Among different types of renewable energies, solar energy can be used for the production of adequate amount of power.

Discovery Engineering, 2016, 4(11), 127-134

Full Text | PDF

Deviations in coupler curve due to hygrothermal environment in four bar planar mechanism made of neat resin

Shailendra Singh, Sanyal S

Demand for higher production rate compels to operate machines at ever increasing speeds. With the advent of new manufacturing technologies now machine parts and mechanisms are also made of composite materials having high strength to weight ratio and high stiffness to weight ratio instead of homogeneous & isotropic materials such as carbon steels or aluminum metals.

Discovery Engineering, 2016, 4(12), 198-207

Full Text | PDF

Dissipation index and efficiency of free hydraulic jump in horizontal prismatic channel: an experimental approach

Sanjeev Kumar Gupta, Dwivedi VK

This study has been carried out in the Hydraulic Laboratory, Department of Applied Mechanics, MNNIT Allahabad for Froude number ranged from 2 to 8 and incoming Reynolds number 8000 to 25000 to find out non – dimensional relationship for dissipation index and efficiency of free hydraulic jump in horizontal prismatic channels.

Discovery Engineering, 2016, 4(12), 245-251

Full Text | PDF

Optimization of overall heat transfer coefficient in flow through double pipe heat exchanger using CFD

Sikindar Baba Md, Bhagvanth Rao M, Sita Rama Raju AV

Heat exchanger is a device that facilitates the transfer of heat between two fluids that are at different temperatures and separated by a solid wall.

Discovery Engineering, 2016, 4(12), 262-276

Full Text | PDF

Comparative study of refrigerants- R134a & R404a

Madhur Raj Krishna, Manikandaraja G, Malarmannan S, Mathanraj V

This paper deals with the comparative study of two refrigerants namely, R134a and R404a. Refrigerant is the one which provides cooling to the food items and other stuffs in the refrigerator.

Discovery Engineering, 2016, 4(12), 306-318

Full Text | PDF

Experimental investigation on fluid flow and heat transfer in various lengths of square twisted duct

Suvanjan Bhattacharyya, Rabi Shankar Mukherjee, Souresh Pal, Kausik Pal, Dipayan Pal

The experimental friction factor and Nusselt number data through a square twisted duct have been presented. Experiments were conducted for air as a working fluid with uniform wall flux boundary condition.

Discovery Engineering, 2016, 4(12), 333-340

Full Text | PDF

Modeling and optimization of Rapid prototyping for an agricultural tractor component

Matta AK, Ranga Raju D, Suman KNS

The paper proposes a Virtual reality system for modeling and optimization of rapid prototyping process for an agricultural tractor component. The system aims to reduce the manufacturing risks of prototypes early in a product development cycle, and hence, reduces the number of costly design- build test cycles.

Discovery Engineering, 2016, 4(13), 375-378

Full Text | PDF

A Quick Switch – Switching on/off from anywhere anytime

Shashank Kumar Singh, Supravat Mondal, Bijoy Kumar Mandal, Syed Zahir Hasan

The main part of automation is controlling of appliances and the main objective of Home automation is to provide a wireless communication link of home appliances to the remote user. This paper “Quick_Switch-Switching ON/OFF from anywhere anytime” is based on interface between the hardware device and the software integrated development environment (IDE).

Discovery Engineering, 2016, 4(13), 379-387

Full Text | PDF

Elegant back scratcher: for efficient repercuse deep-web interfaces with classifier

Sathya V, Selvarani N, Kavitha M

As deep web grows at a very fast lick, there has been increased interest in techniques that help efficiently locate deep-web interfaces. However, due to the large volume of web resources and the dynamic nature of deep web, achieving wide coverage and high efficiency is a challenging issue.

Discovery Engineering, 2016, 4(13), 393-399

Full Text | PDF

Design and analysis of circular microstrip patch antenna by artificial learning methods

Nagarajan P, Sujatha C

This paper described the design of circular Microstrip patch antenna by using artificial learning methods. The circular microstrip patch antenna having gain at 5.85GHz frequency which has application in wireless communication.

Discovery Engineering, 2016, 4(13), 433-439

Full Text | PDF

Segmentation of fluorescence microscopy nucleus image by graph construction and grid formation technique

Kaveya S, Jayanthi KB, Nirmalamadian

This paper presents a new model based fluorescence microscopy nucleus image segmentation based on graph construction and grid formation technique. In medical image segmentation, nucleus image segmentation is one of the most important processes to detect the number of nucleus in a cluster.

Discovery Engineering, 2016, 4(14), 465-471

Full Text | PDF

Knowledge discovery of dynamic data model analysis using classification algorithm

Hemalatha N, Radhakrishnan C, Premkumar N

Traffic Accidents is a major public health problem, causing approximately 1.2 million deaths and 50 million injuries worldwide each year. In developing countries, interest rates between the main reason for deaths and injuries; in particular, India experienced the highest rate accidents of this type.

Discovery Engineering, 2016, 4(14), 484-489

Full Text | PDF

Image retrieval based on a statistical model with effective machine learning strategy and similarity measure

Sathiamoorthy S, Saravanan A

The image retrieval has been an imperative research interest over the decade. For effectively retrieving more similar images from huge image repositories, in this paper, we uses the color autocorrelogram and edge orientation autocorrelogram (EOAC), which represent the global distribution of local spatial correlation between identical color and edge orientations respectively.

Discovery Engineering, 2016, 4(14), 534-539

Full Text | PDF

RESEARCH

Effluent Treatment of Granite industry Waste Water by using Biomaterials

John Mohammad M, Srujan G

Granite cutting plant is one of such industry that releases polluting and turbid effluent. The residue from all these processes is discharged with water as an effluent. The effluent mainly contains many solids that harm to the environment.

Discovery Engineering, 2016, 4(14), 540-552

Full Text | PDF

© Copyright Discovery Publication.  All Rights Reserved
Kanyakumari District, Tamilnadu, India